EXPO21XX - Hydraulic Systems, Cylinders, Lifting Products and Systems, Pumps, Valves, Presses, Pullers, Specialty Tools, Bolting and Workholding by ENERPAC

Concrete Stressing Products

Enerpac features a versatile line of concrete pre-stressing & post-tensioning hydraulic pumps, jacks, and accessories; all from a single source. These comprehensive solutions combine the best of three recognized brands: Enerpac, TT Fijnmechanica and Precision SURE-LOCK®.

Tensioning Jacks

capacity: 20 - 1000 tons
stroke: 6 - 20 in
strand diameters: .375-.60 in
max. pressure: 6,500-10,000 psi

Hydraulic Pumps

High efficiency, two-speed pumps makes fast work of most stressing applications
Available in multiple voltage configurations
Reservoirs feature level indication and steel construction for ease of operation and maximum durability

Cylinders, Lifting Products and Systems

Enerpac provides the largest selection of cylinders and lifting systems, fully supported and available through the most extensive network of distributors worldwide. We have a solution for virtually any application – lifting, pushing, pulling, bending or holding – in most industrial and commercial work environments. Enerpac offers hundreds of different configurations of cylinders and lifting systems, plus products ranging from jacks and lifting bags, for portability and tight fits, to engineered systems for precise control over multiple lift points.

General Purpose Cylinders

RC, RSM, RCS, CLP, RCH, RRH, BRC, BRP, SC-series

Capacity: 5 - 500 tons
Stroke: .25 - 14.25 inches
Max. Pressure: 10,000 psi

Lightweight Aluminum Cylinders

Utilizing the latest in alloy technology, high-strength coatings, seal design and bearing materials, Enerpac aluminum cylinders can change the way you think about your cylinder applications. Our cylinders provide the strength of steel with the weight, transportability and easy positioning of aluminum.

Capacity: 20 - 150 tons
Stroke: 1.97-7.87 inches
Max. Pressure: 10,000 psi

High Tonnage Construction Cylinders

Capacity: 50 - 1,000 tons
Stroke: 1.97 - 11.81 inches
Max. Pressure: 10,000 psi

Low Height Cylinders

CLP, RSM, RCS-series

Capacity: 5 - 500 tons
Stroke: .25 - 2.44 inches
Max. Pressure: 10,000 psi

Hollow Plunger Cylinders

RCH, RACH, RRH-series

Capacity: 12 - 150 tons
Stroke: .31 - 10.13 inches
Center Hole: .77 - 3.13 inches
Max. Pressure: 10,000 psi

Long Stroke / High Cycle Cylinders

RR, RD, AD-series

Capacity: 4 - 500 tons
Stroke: 1.13 - 48.00 inches
Max. Pressure: 10,000 psi

Specialty Lifting Products

LPC, LB, PR, JHA, JH, LW, SOH-series

Capacity: 5 - 150 tons
Stroke: 2 - 6.18 inches
Max. Pressure: 10,000 psi

Lifting Systems

PR, SLS, SHS, BLS-series

Capacity: 10 - 1000 tons
Max. Stroke: 6 - 19.6 inches
Max. Pressure: 10,000 psi

Pumps and Valves

ENERPAC combines the widest selection of hydraulic pumps available with reliability, durability and built-in safety to make it easy to find the right pumps for any application requiring applied force. Enerpac features over 1,000 different pump configurations, including manual, battery powered, electric-, air-, and gasoline-powered models, perfectly matched to Enerpac’s family of tools and accessories. These pumps offer a lifetime warranty, and are designed to make you more productive and efficient in the work you perform.

Manual Pumps

Portable, durable, easy-to-use. Enerpac’s large selection of manual pumps makes it easy to find the most effective compact pump.

Reservoir: 18 - 453 in3
Flow: .037 - .58 in3/stroke
Max. Pressure: 1,500 - 40,000 psi

Electric Pumps

Enerpac’s wide range of electric-driven hydraulic pumps provide durability, high performance and economy.

Reservoir: .5 - 25 gal.
Flow: 8.0 - 200 in3/min.
Max. Pressure: 10,000 ps

Air Hydraulic Pumps

Enerpac’s air-driven hydraulic pumps all feature rugged construction, high-efficiency designs and proven reliability.

Reservoir: 1.0 - 305 in3
Flow: 8 - 80 in3/min
Max. Pressure: 10,000 - 21,750 psi

Gasoline Pumps

Enerpac’s gasoline-driven hydraulic pumps are designed for high efficiency, with higher by-pass pressure for improved productivity. From small portable and high-performance transportable configurations, to large capacity models.

Reservoir: 2.5 - 25 gallon
Flow: 1.5 - 200 in3/min
Engine Size: 7.1, 8.5 and 17.0 Ft.lbs
Max. Pressure: 10,000 psi

Hydraulic Valves

Available in a wide variety of models and configurations, Enerpac has the correct valve to match your application.

Pressure: 0 - 10,000 psi
Flow Max.: 920 - 1040 in3/min
Voltage: 24, 115, 230 V

System Components Enerpac’s System Components are the perfect complement to Enerpac’s cylinders, tools and pumps. The most extensive range of components, available and supported worldwide, completes the Enerpac hydraulic system to provide dependable and efficient performance. Every one of these components - gauges, fittings, manifolds, hoses, couplers and hydraulic oil – is manufactured to the highest standards, in keeping with Enerpac’s focus on reliability and commitment to safety.

Gauges and Accessories Pressure Range: 0 - 50,000 psi Face Diameter: 2.5 - 6.4 inches Accuracy: ± 0.2% - 1.5%	Hoses, Couplers and Oil Contents: 1 quart - 55 gallon Inside Diameter: .25 - .38 inch Length: 2 - 50 feet Max. Pressure: 10,000 psi Max. Flow: 2,500 in3/min Thread: 1/4" and 3/8" NPTF Max. Pressure: 10,000 psi	Manifolds and Fittings Connection: 6 and 7 oil ports Oil Ports: 3/8" NPTF Max. Pressure: 10,000 psi Ports: 2 - 4 Max. Pressure: 10,000 psi	Hydraulic Valves Pressure: 0 - 10,000 psi Flow Max.: 920 - 1040 in3/min Voltage: 24, 115, 230 V

Presses Enerpac’s System Components are the perfect complement to Enerpac’s cylinders, tools and pumps. The most extensive range of components, available and supported worldwide, completes the Enerpac hydraulic system to provide dependable and efficient performance. Every one of these components - gauges, fittings, manifolds, hoses, couplers and hydraulic oil – is manufactured to the highest standards, in keeping with Enerpac’s focus on reliability and commitment to safety.

Press Accessories for VLP, XLP, BPR-series Capacity: 10 - 200 ton	A, IP-Series, Arbor, C-Clamp and Bench Frame Presses Capacity: 5 - 30 ton Max. Daylight and Width: 15.38 and 15.00 inches Mounting Capabilities: Fixed or Portable Max. Pressure: 10,000 psi	TM, LH-Series, Tension Meter and Load Cells Capacity: 2,000 - 200,000 lbs Accuracy: ± 2%	IPR-Series, Roll Frame Presses Capacity: 50 - 200 tons Max. Daylight and Width: 51.00 & 48.00 inches Max. Pressure: 10,000 psi

BV-Series, Hydraulic Bench Vise Max. Force: 5 tons Max. Jaw Opening: 8 inches Jaw Width: 8 inches Max. Pressure: 10,000 psi	IP-Series H-Frame Presses Capacity: 10 - 200 tons Max. Daylight and Width: 54.5 - 48.0 inches Max. Pressure: 10,000 psi	IP-Series, Custom Built Presses Capacity: 10-200 tons Max. Daylight and Width: 54.5 & 48.0 inches Max. Pressure: 10,000 psi

Pullers ENERPAC offers a complete line of pullers with the widest range of sizes, capacities and styles. Whether your application requires mechanical, hydraulic or the patented Posi Lock® system, Enerpac can satisfy your requirements. Made of high strength steel alloys, you can depend on Enerpac pullers to provide years of trouble-free operation, even in the harshest environments.

EP-Series, Posi Lock® Mechanical Pullers Capacity: 2 - 40 tons Max. Reach: 4.00 - 14.00 inches Max. Spread: 0.50 - 25.00 inches	EPH-Series, Posi Lock® Hydraulic Grip Pullers Capacity: 10 - 50 tons Max. Reach: 8.0 - 14.0 inches Max. Spread: 0.75 - 25.0 inches Max. Pressure: 10,000 psi	EPH-Series, Posi Lock® 100 Ton Hydraulic Grip Pullers Capacity: 100 tons Max. Reach: 48 inches Max. Spread: 70 inches Max. Pressure: 10,000 psi	BHP-Series, Bearing Puller Capacity: 8, 20, 30 and 50 tons Max. Reach: 4.33 - 5.71 inches Max. Spread: 4.33 - 14.17 inches Max. Pressure: 10,000 psi

BHP-Series, Bearing Cup Puller Capacity: 8, 20, 30 and 50 tons Max. Reach: 4.33 - 5.71 inches Max. Spread: 4.33 - 14.17 inches Max. Pressure: 10,000 psi	BHP-Series, Grip Puller Sets Capacity: 8, 20, 30 and 50 tons Max. Reach: 9.92 - 27.56 inches Max. Spread: 9.84 - 43.30 inches Max. Pressure: 10,000 psi	BHP-Series, Cross Bearing Puller Sets Capacity: 8, 20, 30 and 50 tons Max. Reach: 14.0 - 34.00 inches Max. Spread: 10.50 - 22.46 inches Max. Pressure: 10,000 psi	BHP-Series, Master Puller Sets Capacity: 8, 20, 30 and 50 tons

Specialty Tools Enerpac offers the most complete line of Specialty Tools in the industry. Each is designed to efficiently and safely solve unique maintenance and production challenges such as bearing & wheel pulling, pipe bending, cutting, spreading and tensioning applications. Enerpac’s Specialty Tools are available in both hydraulic and mechanical configurations, and are also available as complete sets – the precise matching of tools, pumps and system components – to make your work easier and safer to perform.

WR, A-Series, Hydraulic Wedgie and Spread Cylinders Capacity: 0.75 - 1.50 ton Tip Clearance: 0.50 - 1.38 inches Max. Spread: 3.70 - 11.50 inches Max. Pressure: 10,000 psi	STB-Series, Pipe Bender Sets Nominal Pipe Size: 0.5 - 4 inches Max. Bend Angle: 90º Max. Pressure: 10,000 psi	WMC-Series, Self-Contained Hydraulic Cutters Capacity: 3 - 20 tons Max. Material Diameter: 0.38 - 3.38 inches Max. Pressure: 10,000 psi	WHC, WHR-Series, Hydraulic Cutterheads Capacity: 3 - 20 tons Cutting Capacity: 0.50 - 4 inches Max. Pressure: 10,000 psi

CM-Series, Industrial Storage Cases Case Size: .67 - 16 Cubic Ft.	SP-Series, Lightweight Hydraulic Punch Capacity: 35 tons Hole Sizes: 0.31 - 0.81 inches Max. Pressure: 10,000 psi	LW-Series, Vertical Lifting Wedge Min. Clearance: .39 inches Max. Lift Height: 2.72* inches Max. Force: 16 tons Max. Pressure: 10,000 psi	SP-Series, 50 Ton Hydraulic Punch Capacity: 50 tons Hole Sizes: 0.53 - 1.03 inches Max. Pressure: 10,000 psi

ELP, ER, ES-Series, Heavy-Duty Caterroller Load Skates Max. Carrying Capacity: 80 tons	MS-Series, Maintenance Sets Capacity: 2.5 - 12.5 tons Max. Pressure: 5,000 psi	ST-Series, Tool-Pump Sets Punch Sets: 35 tons Cutter Sets: 4-20 tons Pipe Benders: 1/2-4 inches Max. Pressure: 10,000 psi	DA, PTJ-Series, Mono-Strand Stressing Tools Capacity: 20 - 30 tons Stroke: 8.5 - 10 inches Strand Diameters: .375 - .60 inch Max. Pressure: 6,500 - 10,000 psi

MS-Series, Base, Collar and Plunger Attachments Capacity: 2.5 - 12.5 tons Pressure: 5,000 psi	MS-Series, Chains and Attachments for Pulling Capacity: 2.5 - 12.5 tons Pressure: 5,000 psi	MS-Series, Tubes, Connectors and Adaptors Capacity: 1.0 - 12.5 tons Pressure: 5,000 psi

Bolting Enerpac’s comprehensive range of hydraulic and mechanical Bolting products provides precise & effective force to make your work more productive, safer, and easier to perform. From joint assembly and controlled tightening to joint separation, Enerpac’s bolting tools & accessories offer the solution best-suited to the project, available from one source.

Joint Assembly Tools Capacity: 12 - 100 tons Stroke: .31 - 6.13 inches Center Hole: .77 - 3.11 inches Max. Pressure: 10,000 psi Bolt Hole Range: 11/16 inch - 2-1/8 inches Flange Wall Thickness: 11/16 - 8 inches Max. Force: 0.3 - 5.5 tons	Controlled Tightening Tools Fasteners must be tightened to the correct force to prevent failure in service. The accurate application of load to a fastener assembly is critical to achieving joint integrity. Enerpac’s Bolting solutions provide a comprehensive range of applied force controlled tightening options best matched to your application. Max. Torque: 19,875 - 35,000 Ft.lbs Square Drive:3/4 – 2 1/2 inches Nose Radius: .99 - 4.52 inches Max. Pressure: 10,000 - 21,750 psi	Joint Separation Tools Correct joint disassembly is especially important during maintenance operations. Separation of stubborn joints is often a laborious and time-consuming task. Traditional methods may carry the risk of personal injury or damage to expensive joint components. Our wide range of Joint Separation equipment is designed specifically to provide quicker, simpler and safer solutions. Capacity: 0.75 - 192.5 ton Tip Clearance: 0.50 - 1.38 inches Max. Spread: 0.24 - 11.50 inches Max. Pressure: 10,000 - 11,600 psi	Associated Pumps Enerpac offers a wide range of hydraulic wrench pumps, with electric or air motors to power single or double-acting hydraulic torque wrenches. Safe and efficient new Enerpac Z-Class ZU4T-series pumps with universal electric motor made especially for repetitive bolting tasks. Reservoir: 0.5 - 10 gal. Flow: 8 - 120 in3/min. Max. Pressure: 10,000 - 21,750 psi

Workholding

The full range of well-designed, versatile and reliable Workholding products from Enerpac provides users with dependable production automation solutions in virtually every type of manufacturing process. Global distribution yet local technical support ensure that your application needs will be solved successfully. Exclusive designs like our Collet-Lok® products series, and a wide selection of high-performance power sources, bring innovation and reliability to your project challenges.

Swing Cylinders

Enerpac Swing Cylinders offer the benefits of precision and maximum clamping force, plus application flexibility through our wide range of products. Their flexible design allows easier connections and precise positioning, plus simple installation and removal. Available in single- and double-acting models.

Clamp Force: 475 - 7600 lbs
Stroke: .25 - 2.50 inch
Pressure: 500 - 5,000 psi

Work Supports

Enerpac Work Supports combine the multiple mounting configurations for design flexibility, corrosion resistance, and low-pressure lock-up to plug into mechanical tool hydraulic systems. Our exclusive Collet-Lok design allows the support to maintain its position even after the hydraulic force is removed.

Force: 1650 - 10,000 lbs
Stroke: .38 - .65 inch
Pressure: 700 - 5000 psi

Linear Cylinders

Enerpac has the most complete line of Linear Cylinders – compact short-stroke spring return cylinders to heavy-duty double-acting automation cylinders. Whether you need to push it, pull it, clamp it, punch it, stamp it, press it, or hold it in place for days at a time, Enerpac has the right linear cylinder.

Force 380 - 62,850 lbs
Stroke 0.09 - 12 inch
Pressure 500 - 10000 psi

Power Sources

From simple manual pumps, to heavy-duty, and even customizable electric-driven hydraulic pumps, Enerpac has a wide range of power sources to meet your specific needs. Combined with a wide range of accessories, Enerpac power sources are versatile, durable and designed for long life and reliability.

Valves

A complete line of valves & accessories to complement any hydraulic system. This includes manual and electric directional valves, plus pressure control, flow control and specialty valves to satisfy your application needs.

Pressure: 0 - 10000 psi
Flow: 250 - 1830 in3/min
Voltage: 24 - 230 VAC

System Components

The complete line of Enerpac’s Systems Components – gauges, pressure switches, hoses, couplers – is available in a variety of sizes, and is versatile enough for many applications. Specialized components such as accumulators and automatic coupler systems complete the full range of products. Each component is engineered to make your work easier and safer to perform.

Mechanical Actuators

Enerpac’s line of Uni-lift® mechanical actuators has set a new standard for linear motion control. Improving on the time-tested concept of converting rotary movement into linear motion, the Uni-Lift actuator series is ideal for a variety of challenging screw jack applications such as satellite dish positioning, solar panel tracking as well as moving heavy equipment.

M-Series, Machine Screw Actuators

Capacity .25 - 250 tons
Max. Travel 232 inches
Max. Speed 129 in/min

B-Series, Ball Screw Actuators

Capacity 1 - 100 tons
Max. Travel 230 inches
Max. Speed 175 in/min

Accessories

A comprehensive range of accessories are available to tailor your UNI-LIFT® system to meet your project requirements.

EXPO21XX e-Fair		Navigation : EXPO21XX.com > FLUID 21XX > Hydraulic Valves > ENERPAC